Welcome to my crochet lighthouse pattern. This pattern was another request. This is what the finished lighthouse applique will look like.
There’s also a video tutorial for this pattern available on my YouTube channel at crochet lighthouse tutorial.
To view this pattern for free, continue to scroll down this page. If you want to download the ad-free version, it’s available on my Ravelry store for $1 at crochet lighthouse pattern and on LoveCrafts at crochet lighthouse pattern.
This pattern will be using UK terminology. If you want to view the US version, go to crochet lighthouse pattern (US version).
Crochet Lighthouse Pattern
Abbreviations
- st – stitch
- sts – stitches
- ch – chain
- sl st – slip stitch
- dc – double crochet
- htr – half treble crochet
- tr – treble crochet
- dtr – double treble crochet
Materials Used
- Any thickness crochet cotton or yarn, I used Scheepjes Maxi Sweet Treat 2 ply crochet cotton colours (110) Black, (106) Snow White, (242) Metal Grey, (115) Hot Red and (074) Mercury.
- A crochet hook, I used a 1mm hook.
- A darning needle to weave in ends.
- Scissors.
- Thread and needle to stitch the lighthouse together.
Size
Large lighthouse (Using 8 ply yarn & a 3mm hook)
18cm wide x 19cm high or 7” wide x 7.5” high
Medium lighthouse (Using 4 ply crochet cotton & a 1.5mm hook)
9cm wide x 12cm high or 3.5” wide x 4.5” high
Small lighthouse (Using 2 ply crochet cotton & a 1mm hook)
8cm wide x 10cm high or 3” wide x 4” high
Notes: I worked into front and back loops to add texture, but you could work into both loops if you prefer. For row 8 its’s important to work into the front loop only when working the red so the eaves can be worked into the other loop.
When leaving the cotton where it is always leave it on the wrong side of your work.
Lighthouse
Using (106) Snow White work 30 ch.
Row 1: Miss 1st ch, work 1 dc in each remaining ch. Turn. (29 sts)
Row 2: 2 ch, working into front loop only work a joined htr over 1st 2 sts, 1 htr in each st to end. Turn. (28 sts)
Row 3: 2 ch, working into back loop work 1 htr in each st. Turn. (28 sts)
Row 4: 2 ch, working into front loop only work a joined htr over 1st 2 sts, 1 htr in each st to end. Turn. (27 sts)
Row 5: 2 ch, working into back loop work 1 htr in each st. Turn. (27 sts)
Row 6: 2 ch, working into front loop only work a joined htr over 1st 2 sts, 1 htr in each st to end. Don’t fasten off. (26 sts)
House Roof
Join in (115) Hot Red.
Row 7: 2 ch, working into back loop and over the top of the white cotton work 3 htr in 1st st, 1 htr in each of next 13 sts, change to (106) Snow White and leave the Hot Red where it is, 1 htr in each st to end. Turn. (28 sts)
Row 8: 2 ch, working into front loop for the whole row work a joined htr over 1st 2 sts, 1 htr in each of next 8 sts, a joined htr over following 2 sts, change to Hot Red and leave the Snow White where it is, make sure you work in front loop for rest of row so eaves can be added to loop left, work 1 htr in same st as last part of joined htr and each st to last 2 sts, a joined htr over last 2 sts. Turn. (26 sts)
Row 9: 2 ch, working into back loop for whole row work 1 htr in each of 1st 16 sts, change to Snow White and leave the Hot Red where it is, 1 htr in each st to end. Turn. (26 sts)
Row 10: 2 ch, working into front loop work a joined htr over 1st 2 sts, 1 htr in each of next 6 sts, a joined htr over following 2 sts, change to Hot Red and leave the Snow White where it is, working into both loops work 1 htr in same st as last part of joined htr and 1 htr in each st to last 2 sts, a joined htr over last 2 sts. Fasten off the Hot Red.
Bring a loop of Snow White up into back loop of 8th last st where shown.
Row 11: 2 ch, working into back loop work 1 htr in same st as ch, 1 htr in each st to end. Turn. (8 sts)
Row 12: 2 ch, working into front loop work a joined htr over 1st 2 sts, 1 htr in each of next 4 sts, a joined htr over following 2 sts. Turn. (6 sts)
Row 13: 2 ch, working into back loop work 1 htr in each st. Turn. (6 sts)
Row 14: 2 ch, working into front loop work 1 htr in each st. Turn. (6 sts)
Row 15: 2 ch, working into back loop work 1 htr in each st. Turn. (6 sts)
Row 16: 2 ch, working into front loop work 1 htr in each st. Turn. (6 sts)
Row 17: 2 ch, working into back loop work 1 htr in each st. Turn. (6 sts)
Row 18: 2 ch, working into front loop work 1 htr in each st. Turn. (6 sts)
Row 19: 2 ch, working into back loop work 1 htr in each st. Fasten off.
Eaves
Join (115) Hot Red to front loop left in middle of row 8 where shown.
3 ch, work 1 htr in 3rd ch from hook, 1 htr in same place as join, 1 htr in front loop left in each st to end of roof, 2 ch, sl st in same place as last st. Work 1 dc in each st on straight edges and 2 dc in corner st of roof to end of roof. Fasten off.
Join (242) Metal Grey in back loop of 1st st of eaves.
1 ch, work 1 dc in same st as join, 1 dc in back loop of each st to end of eaves. Fasten off.
Neatening Row
Join (106) Snow White to 1st st of white after roof.
Work 1 sl st in each st on straight edges to bottom and 1 sl st, 1 ch, 1 sl st in corner sts, work 1 dc in each st along bottom, 1 dc, 1 ch, 1 dc in corner st, 1 dc in each st to roof. Fasten off.
Join (110) Black to back loop of 1st st of neatening row.
1 ch, working into back loop work 1 sl st in each st on straight edges to bottom and 1 sl st, 1 ch and 1 sl st in each corner st. Fasten off.
Light
Join (242) Metal Grey to 1st st at top of lighthouse where shown. I left a long tail at beginning to use for neatening row.
6 ch, work 1 dtr in middle of top of lighthouse, 2 ch, work 1 dtr in 2nd last st of top of lighthouse. Fasten off.
Neatening Row
Using the tail left at beginning work 1 sl st in each st on straight edges to lighthouse working 7 sts along the top and 1 sl st, 1 ch and 1 sl st in each corner st. Fasten off.
Top of Light
Join (074) Mercury to 1st st of light. I left a long tail at beginning to use for the neatening row.
Row 1: 1 ch, work a joined dc over same st as join and next st, 1 dc in each of following 3 sts, a joined dc over last 2 sts. Turn. (5 sts)
Row 2: 1 ch, work a joined dc over 1st 2 sts, 1 dc in next st, a joined dc over last 2 sts. (3 sts)
Row 3: 1 ch, work a joined dc over the 3 sts. Work about 4 ch to stitch down the centre of the light top. Fasten off.
Neatening Row
Using the tail left at beginning work 1 sl st in each st to light working behind the ch. Fasten off.
Windows (Make 3)
Using (110) Black work 5 ch.
Miss 2 ch, work 1 htr in each remaining ch. Fasten off.
Using (074) Mercury join to centre of long side leaving a tail at beginning to embroider marking across window. Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to beginning of row. Fasten off.
Join (115) Hot Red to any st of window.
Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to beginning of row. Fasten off.
Door
Using (242) Steel Grey work 3 ch.
Row 1: Miss 1st ch, work 1 dc in each remaining ch. Turn. (2 sts)
Rows 2-5: 1 ch, work 1 dc in each st. Turn. (2 sts)
Row 6: 1 ch, work 1 dc in each st. Don’t turn or fasten off.
Neatening Row
1 ch, work 1 dc in each st on straight edges and 1 dc, 1 ch and 1 dc in corner sts to bottom. Don’t work along bottom. Fasten off.
Join (074) Mercury to 1st st of neatening row.
Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to end of neatening row. Fasten off.
Join (115) Hot Red to 1st st of Mercury.
Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to end of Mercury. Fasten off.
Platform
Using (110) Black work 10 ch.
Work 2 dc in 2nd ch from hook, 1 dc in each ch to last ch, 2 dc in last ch. Fasten off.
Join (074) Mercury to back loop of 1st st.
Row 1: 6 ch, (miss 2 sts, work 1 dtr in following st, 2 ch) 2 times, 1 dtr in 2nd last st. Miss last st. Turn.
Row 2: Work 1 sl st in each st to 4th last st. Miss last 3 ch. Fasten off.
Supports
Join (074) Mercury to each bottom side of platform.
Work 3 ch. Fasten off. I left a tail to stitch them to the lighthouse.
To Make Up
Weave in ends. Sew the chain down the centre of top of light.
Stitch the door to the lighthouse.
Embroider marking across centre of window.
Attach the windows to the lighthouse.
Sew the eaves down.
Stitch the platform near the top of the lighthouse and attach the supports to the side of the lighthouse.
And there’s the finished lighthouse. I’ve also made it in different sizes.
I hope that you’ve enjoyed the pattern. Have a look at some of my other patterns, including the crochet castle, the house pattern, the beach hut, and the beach umbrella.
