Welcome to my crochet lighthouse pattern. This pattern was another request. This is what the finished lighthouse applique will look like.

There’s also a video tutorial for this pattern available on my YouTube channel at crochet lighthouse tutorial.

To view this pattern for free, continue to scroll down this page. If you want to download the ad-free version, it’s available on my Ravelry store for $1 at crochet lighthouse pattern and on LoveCrafts at crochet lighthouse pattern.

This pattern will be using US terminology. If you want to view the UK version, go to crochet lighthouse pattern (UK version).

Crochet Lighthouse Pattern

Abbreviations 

• st – stitch
• sts – stitches
• ch – chain
• sl st – slip stitch
• sc – single crochet
• hdc – half double crochet
• dc – double crochet
• tr – treble crochet

Materials Used

• Any thickness crochet cotton or yarn, I used Scheepjes Maxi Sweet Treat 2 ply crochet cotton colors (110) Black, (106) Snow White, (242) Metal Grey, (115) Hot Red and (074) Mercury.
• A crochet hook, I used a 1mm hook.
• A darning needle to weave in ends.
• Scissors.
• Thread and needle to stitch the lighthouse together.

Size

Large lighthouse (Using 8 ply yarn & a 3mm hook)

18cm wide x 19cm high or 7” wide x 7.5” high

Medium lighthouse (Using 4 ply crochet cotton & a 1.5mm hook)

9cm wide x 12cm high or 3.5” wide x 4.5” high

Small lighthouse (Using 2 ply crochet cotton & a 1mm hook)

8cm wide x 10cm high or 3” wide x 4” high

Notes:  I worked into front and back loops to add texture, but you could work into both loops if you prefer.  For row 8 its’s important to work into the front loop only when working the red so the eaves can be worked into the other loop.

When leaving the cotton where it is always leave it on the wrong side of your work.

Lighthouse

Using (106) Snow White work 30 ch.

Row 1:  Miss 1^st ch, work 1 sc in each remaining ch.  Turn.  (29 sts)

Row 2:  2 ch, working into front loop only work a joined hdc over 1^st 2 sts, 1 hdc in each st to end.  Turn.  (28 sts)

Row 3:  2 ch, working into back loop work 1 hdc in each st.  Turn.  (28 sts)

Row 4:   2 ch, working into front loop only work a joined hdc over 1^st 2 sts, 1 hdc in each st to end.  Turn.  (27 sts)

Row 5:  2 ch, working into back loop work 1 hdc in each st.  Turn.  (27 sts)

Row 6:  2 ch, working into front loop only work a joined hdc over 1^st 2 sts, 1 hdc in each st to end.  Don’t fasten off.  (26 sts)

House Roof

Join in (115) Hot Red.

Row 7:  2 ch, working into back loop and over the top of the white cotton work 3 hdc in 1^st st, 1 hdc in each of next 13 sts, change to (106) Snow White and leave the Hot Red where it is, 1 hdc in each st to end.  Turn.  (28 sts)

Row 8: 2 ch, working into front loop for the whole row work a joined hdc over 1^st 2 sts, 1 hdc in each of next 8 sts, a joined hdc over following 2 sts, change to Hot Red and leave the Snow White where it is, make sure you work in front loop for rest of row so eaves can be added to loop left, work 1 hdc in same st as last part of joined hdc and each st to last 2 sts, a joined hdc over last 2 sts.  Turn.  (26 sts)

Row 9:  2 ch, working into back loop for whole row work 1 hdc in each of 1^st 16 sts, change to Snow White and leave the Hot Red where it is, 1 hdc in each st to end.  Turn. (26 sts)

Row 10:  2 ch, working into front loop work a joined hdc over 1^st 2 sts, 1 hdc in each of next 6 sts, a joined hdc over following 2 sts, change to Hot Red and leave the Snow White where it is, working into both loops work 1 hdc in same st as last part of joined hdc and 1 hdc in each st to last 2 sts, a joined hdc over last 2 sts.  Fasten off the Hot Red.

Bring a loop of Snow White up into back loop of 8^th last st where shown. 

Row 11:  2 ch, working into back loop work 1 hdc in same st as ch, 1 hdc in each st to end.  Turn. (8 sts)

Row 12:  2 ch, working into front loop work a joined hdc over 1^st 2 sts, 1 hdc in each of next 4 sts, a joined hdc over following 2 sts.  Turn.  (6 sts)

Row 13:  2 ch, working into back loop work 1 hdc in each st.  Turn.  (6 sts)

Row 14:  2 ch, working into front loop work 1 hdc in each st.  Turn.  (6 sts)

Row 15:  2 ch, working into back loop work 1 hdc in each st.  Turn.  (6 sts)

Row 16:  2 ch, working into front loop work 1 hdc in each st.  Turn.  (6 sts)

Row 17:  2 ch, working into back loop work 1 hdc in each st.  Turn.  (6 sts)

Row 18:  2 ch, working into front loop work 1 hdc in each st.  Turn.  (6 sts)

Row 19:  2 ch, working into back loop work 1 hdc in each st.  Fasten off.

Eaves

Join (115) Hot Red to front loop left in middle of row 8 where shown.

3 ch, work 1 hdc in 3^rd ch from hook, 1 hdc in same place as join, 1 hdc in front loop left in each st to end of roof, 2 ch, sl st in same place as last st.  Work 1 sc in each st on straight edges and 2 sc in corner st of roof to end of roof.  Fasten off.

Join (242) Metal Grey in back loop of 1^st st of eaves.

1 ch, work 1 sc in same st as join, 1 sc in back loop of each st to end of eaves.  Fasten off.

Neatening Row

Join (106) Snow White to 1^st st of white after roof.

Work 1 sl st in each st on straight edges to bottom and 1 sl st, 1 ch, 1 sl st in corner sts, work 1 sc in each st along bottom, 1 sc, 1 ch, 1 sc in corner st, 1 sc in each st to roof.  Fasten off.

Join (110) Black to back loop of 1^st st of neatening row.

1 ch, working into back loop work 1 sl st in each st on straight edges to bottom and 1 sl st, 1 ch and 1 sl st in each corner st.  Fasten off.

Light

Join (242) Metal Grey to 1^st st at top of lighthouse where shown.  I left a long tail at beginning to use for neatening row.

6 ch, work 1 tr in middle of top of lighthouse, 2 ch, work 1 tr in 2^nd last st of top of lighthouse.  Fasten off.

Neatening Row

Using the tail left at beginning work 1 sl st in each st on straight edges to lighthouse working 7 sts along the top and 1 sl st, 1 ch and 1 sl st in each corner st.  Fasten off.  

Top of Light

Join (074) Mercury to 1^st st of light. I left a long tail at beginning to use for the neatening row.  

Row 1:  1 ch, work a joined sc over same st as join and next st, 1 sc in each of following 3 sts, a joined sc over last 2 sts.  Turn.  (5 sts)

Row 2:  1 ch, work a joined sc over 1^st 2 sts, 1 sc in next st, a joined sc over last 2 sts.  (3 sts)

Row 3:  1 ch, work a joined sc over the 3 sts.  Work about 4 ch to stitch down the centre of the light top.  Fasten off.

Neatening Row

Using the tail left at beginning work 1 sl st in each st to light working behind the ch.  Fasten off.

Windows (Make 3)

Using (110) Black work 5 ch.

Miss 2 ch, work 1 hdc in each remaining ch.  Fasten off.

Using (074) Mercury join to centre of long side leaving a tail at beginning to embroider marking across window.  Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to beginning of row.  Fasten off.

Join (115) Hot Red to any st of window.

Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to beginning of row.  Fasten off.

Door

Using (242) Steel Grey work 3 ch.

Row 1:  Miss 1^st ch, work 1 sc in each remaining ch.  Turn.  (2 sts)

Rows 2-5:  1 ch, work 1 sc in each st.  Turn.  (2 sts)

Row 6:  1 ch, work 1 sc in each st.  Don’t turn or fasten off.

Neatening Row

1 ch, work 1 sc in each st on straight edges and 1 sc, 1 ch and 1 sc in corner sts to bottom.  Don’t work along bottom.  Fasten off.

Join (074) Mercury to 1^st st of neatening row.

Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to end of neatening row.  Fasten off.

Join (115) Hot Red to 1^st st of Mercury.

 

Work 1 sl st in each st on edges and 1 sl st, 1 ch and 1 sl st in corner sts around window to end of Mercury.  Fasten off.

Platform

Using (110) Black work 10 ch.

Work 2 sc in 2^nd ch from hook, 1 sc in each ch to last ch, 2 sc in last ch.  Fasten off.

Join (074) Mercury to back loop of 1^st st.

Row 1:  6 ch, (miss 2 sts, work 1 tr in following st, 2 ch) 2 times, 1 tr in 2^nd last st.  Miss last st.  Turn.

Row 2:  Work 1 sl st in each st to 4^th last st.  Miss last 3 ch.  Fasten off.

Supports

Join (074) Mercury to each bottom side of platform.

Work 3 ch.  Fasten off.  I left a tail to stitch them to the lighthouse.

To Make Up

Weave in ends.  Sew the chain down the centre of top of light.

Stitch the door to the lighthouse.

Embroider marking across centre of window.

Attach the windows to the lighthouse.

Sew the eaves down.

Stitch the platform near the top of the lighthouse and attach the supports to the side of the lighthouse.

And there’s the finished lighthouse. I’ve also made it in different sizes.

I hope that you’ve enjoyed the pattern. Have a look at some of my other patterns, including the crochet castle, the house pattern, the beach hut, and the beach umbrella.